News

13 11, 2020

Media Report – Interview on Hansel by DredgeingToday

2020-11-13T05:48:20+00:00November 13th, 2020|Dredging Knowledge, HANSEL News|

  Link to original: https://www.dredgingtoday.com/2020/11/11/interview-hansel-to-deliver-25-sets-of-dredgers-in-2021/ Hansel marine, a Chinese company involved in the production of dredgers and dredging equipment, has reported a very busy 2020, filled with lots of activities, challenges and also great accomplishments. Enough [...]

28 10, 2020

Hansel dispatched the HS-50B CSD to Anhui Province, China

2020-10-28T08:59:25+00:00October 28th, 2020|HANSEL News|

In middle of this October, Hansel finished the construction of two sets of HS-50B CSD which are dispatched to Anhui Province, China. The HS-50B CSD is a customized design cutter suction dredger for operation in [...]

23 06, 2020

HS-40A Cutter Suction Dredger arrived in Xinjiang Province, China

2020-09-02T01:15:03+00:00June 23rd, 2020|HANSEL News|

The HS-40A Cutter Suction Dredger is built for dredging operation at Bosten Lake area in this province. After the construction and commissioning of the dredger in Hansel workshop, the dredger is dismantled in parts and [...]

9 06, 2020

Advantages and Characteristics of HANSEL Cutter Suction Dredger (Epi 1)

2020-09-02T04:02:30+00:00June 9th, 2020|Dredging Knowledge|

Hansel Marine is a leading Chinese manufacturer of Cutter Suction Dredger (CSD). Distinguished from some other Chinese manufacturers, HANSEL is a shipyard with rich experiences in building kinds of marine vessels, which makes HANSEL very [...]

3 06, 2020

Media Report – Hansel Booster Boat 350 delivered into Tai Lake

2020-09-02T01:26:10+00:00June 3rd, 2020|HANSEL News|

Hansel Marine, a Chinese manufacturer of dredgers and dredging equipment, completed the construction of a new Booster Boat 350 and delivered this piece of equipment to Tai Lake last month.           [...]

21 05, 2020

Construction combination of large and special projects

2020-09-01T06:07:14+00:00May 21st, 2020|Dredging Knowledge|

How to choose construction combination Large projects can be divided into several construction sections with different construction conditions, and they need both excavation and filling, according to the characteristics of the above construction composition, choose [...]

9 05, 2020

Construction combination for the purpose of excavation

2020-09-02T06:26:53+00:00May 9th, 2020|Dredging Knowledge|

1.Water depth of construction areas On navigable rivers, vessels frequent traffic, or there are large wind waves on the approach channel of the seaport and estuarine port. if the construction area has enough water depth, [...]

20 04, 2020

Brief introduction of the disassembly process of the wheelset

2020-09-02T07:25:12+00:00April 20th, 2020|Dredging Knowledge|

At present, due to the increasing demand for dredging channels and building factories in the sea, large cutter suction dredgers are widely used in port construction and Marine development, playing a huge role. Cutter suction [...]

Go to Top